Specifying A Portal Authentication Domain - HPE FlexNetwork 7500 Series Security Configuration Manual

Make sure the maximum combined number of IPv4 and IPv6 portal users specified on all interfaces
does not exceed the system-allowed maximum number. Otherwise, the exceeding number of portal
users will not be able to log in to the device.
To set the maximum number of total portal users allowed in the system:
Step
1. Enter system view.
2. Set the maximum number
of total portal users.
To set the maximum number of portal users on an interface:
Step
1. Enter system view.
2. Enter interface view.
3. Set the maximum number
of portal users.

Specifying a portal authentication domain

An authentication domain defines a set of authentication, authorization, and accounting policies.
Each portal user belongs to an authentication domain and is authenticated, authorized, and
accounted in the domain.
With an authentication domain specified on an interface, the device uses the authentication domain
for AAA of portal users. This allows for flexible portal access control.
The device selects the authentication domain for a portal user in this order:
1. ISP domain specified for the interface.
2. ISP domain carried in the username.
3. System default ISP domain. For information about the default ISP domain, see "Configuring
AAA."
You can specify an IPv4 portal authentication domain, an IPv6 portal authentication domain, or both
on an interface.
To specify an IPv4 portal authentication domain:
Step
1. Enter system view.
2. Enter interface view.
3. Specify an IPv4 portal
authentication domain.
To specify an IPv6 portal authentication domain:
Command
system-view
portal max-user max-number
Command
system-view
interface interface-type
interface-number
portal { ipv4-max-user |
ipv6-max-user } max-number
Command
system-view
interface interface-type
interface-number
portal domain domain-name
166
Remarks
N/A
By default, no limit is set on the
number of portal users in the
system.
Remarks
N/A
N/A
By default, no limit is set on the
number of portal users.
Remarks
N/A
N/A
By default, no ISP domain is
specified for IPv4 portal users on
the interface.