HPE FlexNetwork 7500 Series Security Configuration Manual page 532

# Configure domain triple as the default domain. If a username entered by a user includes no
ISP domain name, the AAA method of the default domain is used.
[Device] domain default enable triple
Verifying the configuration
1. Verify that the Web user can pass Web authentication.
# On the Web user terminal, use a Web browser to access an external network and then enter
the correct username and password on the authentication page
http://4.4.4.4/portal/logon.html. (Details not shown.)
# Display information about online Web authentication users.
[Device] display web-auth user
User Name: userpt
MAC address: 6805-ca17-4a0b
Access interface: GigabitEthernet1/0/1
Initial VLAN: 14
Authorization VLAN: 14
Authorization ACL ID: N/A
Authorization user profile: N/A
Total 1 users matched.
2. Verify that the printer can pass MAC authentication.
# Connect the printer to the network. (Details not shown.)
# Display information about online MAC authentication users.
[Device] display mac-authentication connection
Slot ID: 1
User MAC address: f07d-6870-725f
Access interface: GigabitEthernet1/0/1
Username: f07d6870725f
Authentication domain: triple
Initial VLAN: 14
Authorization untagged VLAN: 14
Authorization tagged VLAN: N/A
Authorization ACL ID: N/A
Authorization user profile: N/A
Authorization URL: N/A
Termination action: N/A
Session timeout period: N/A
Online from: 2015/01/04 18:01:43
Online duration: 0h 0m 2s
Total 1 connections matched.
3. Verify that the 802.1X client can pass 802.1X authentication.
# On the 802.1X client, initiate 802.1X authentication and then enter the correct username and
password. (Details not shown.)
# Display information about online 802.1X users.
[Device] display dot1x connection
Slot ID: 1
User MAC address: 7446-a091-84fe
Access interface: GigabitEthernet1/0/1
Username: userdot
518