HPE FlexNetwork 7500 Series Security Configuration Manual page 54

Specifying the HWTACACS authentication servers
You can specify one primary authentication server and a maximum of 16 secondary authentication
servers for an HWTACACS scheme. When the primary server is not available, the device searches
for the secondary servers in the order they are configured. The first secondary server in active state
is used for communication.
If redundancy is not required, specify only the primary server. An HWTACACS server can function as
the primary authentication server in one scheme and as the secondary authentication server in
another scheme at the same time.
To specify HWTACACS authentication servers for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS
scheme view.
3. Specify HWTACACS
authentication servers.
Specifying the HWTACACS authorization servers
You can specify one primary authorization server and a maximum of 16 secondary authorization
servers for an HWTACACS scheme. When the primary server is not available, the device searches
for the secondary servers in the order they are configured. The first secondary server in active state
is used for communication.
If redundancy is not required, specify only the primary server. An HWTACACS server can function as
the primary authorization server of one scheme and as the secondary authorization server of another
scheme at the same time.
To specify HWTACACS authorization servers for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS
scheme view.
3. Specify HWTACACS
authorization servers.
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
•
Specify the primary HWTACACS
authentication server:
primary authentication
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string |
single-connection | vpn-instance
vpn-instance-name ] *
•
Specify a secondary HWTACACS
authentication server:
secondary authentication
{ ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string |
single-connection | vpn-instance
vpn-instance-name ] *
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
•
Specify the primary HWTACACS
authorization server:
primary authorization
{ ipv4-address | ipv6
ipv6-address } [ port-number | key
{ cipher | simple } string |
single-connection |
vpn-instance
vpn-instance-name ] *
40
Remarks
N/A
N/A
By default, no authentication
servers are specified.
Two HWTACACS authentication
servers in a scheme, primary or
secondary, cannot have the
same combination of IP address,
port number, and VPN instance.
Remarks
N/A
N/A
By default, no authorization
servers are specified.
Two HWTACACS authorization
servers in a scheme, primary or
secondary, cannot have the same
combination of IP address, port
number, and VPN instance.