HPE FlexNetwork 7500 Series Security Configuration Manual page 479
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (506 pages) ,
- Command reference manual (474 pages) ,
- Network management and monitoring command reference (430 pages)
Table of Contents
Advertisement
[SwitchB-vlan100] quit
# Configure GigabitEthernet 1/0/1 and GigabitEthernet 1/0/3 as network ports.
[SwitchB] interface gigabitethernet 1/0/1
[SwitchB-GigabitEthernet1/0/1] mac-forced-forwarding network-port
[SwitchB-GigabitEthernet1/0/1] quit
[SwitchB] interface gigabitethernet 1/0/3
[SwitchB-GigabitEthernet1/0/3] mac-forced-forwarding network-port
4.
Enable STP on Switch C globally to make sure STP is enabled on interfaces.
<SwitchC> system-view
[SwitchC] stp global enable
465
Advertisement
Table of Contents
Troubleshooting
