HPE FlexNetwork 7500 Series Security Configuration Manual page 72
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (506 pages) ,
- Command reference manual (474 pages) ,
- Network management and monitoring command reference (430 pages)
Table of Contents
Advertisement
Step
1.
Enter system view.
2.
(Optional.) Define an
extended RADIUS
attribute.
3.
Enter RADIUS scheme
view.
4.
Enable the RADIUS
attribute translation
feature.
5.
Configure a RADIUS
attribute conversion rule.
6.
Configure a RADIUS
attribute rejection rule.
To configure the RADIUS attribute translation feature for a RADIUS DAS:
Step
1.
Enter system view.
2.
(Optional.) Define an
extended RADIUS
attribute.
3.
Enter RADIUS DAS view.
4.
Enable the RADIUS
attribute translation
feature.
5.
Configure a RADIUS
attribute conversion rule.
6.
Configure a RADIUS
attribute rejection rule.
Command
system-view
radius attribute extended
attribute-name [ vendor vendor-id ]
code attribute-code type { binary |
date | integer | interface-id | ip |
ipv6 | ipv6-prefix | octets | string }
radius scheme
radius-scheme-name
attribute translate
attribute convert src-attr-name to
dest-attr-name { { access-accept |
access-request | accounting } * |
{ received | sent } * }
attribute reject attr-name
{ { access-accept |
access-request | accounting } * |
{ received | sent } * }
Command
system-view
radius attribute extended
attribute-name [ vendor vendor-id ]
code attribute-code type { binary |
date | integer | interface-id | ip |
ipv6 | ipv6-prefix | octets | string }
radius dynamic-author server
attribute translate
attribute convert src-attr-name to
dest-attr-name { { coa-ack |
coa-request } * | { received | sent }
* }
attribute reject attr-name
{ { coa-ack | coa-request } * |
{ received | sent } * }
58
Remarks
N/A
By default, no user-defined
extended RADIUS attributes exist.
Repeat this command to define
multiple extended RADIUS
attributes.
N/A
By default, this feature is disabled.
By default, no RADIUS attribute
conversion rules exist.
Repeat this command to add
multiple RADIUS attribute
conversion rules.
By default, no RADIUS attribute
rejection rules exist.
Repeat this command to add
multiple RADIUS attribute rejection
rules.
Remarks
N/A
By default, no user-defined
extended RADIUS attributes exist.
Repeat this command to define
multiple extended RADIUS
attributes.
N/A
By default, this feature is disabled.
By default, no RADIUS attribute
conversion rules exist.
Repeat this command to add
multiple RADIUS attribute
conversion rules.
By default, no RADIUS attribute
rejection rules exist.
Repeat this command to add
multiple RADIUS attribute rejection
rules.
Advertisement
Table of Contents
Troubleshooting
