HPE FlexNetwork 7500 Series Security Configuration Manual page 200

Figure 57 Adding a portal device
4. Associate the portal device with the IP address group:
a. As shown in Figure
of device NAS to open the port group configuration page.
b. Click Add to open the page as shown in
c. Enter the port group name.
d. Select the configured IP address group.
The IP address used by the user to access the network must be within this IP address
group.
e. Use the default settings for other parameters.
f. Click OK.
Figure 58 Device list
58, click the icon in the Port Group Information Management column
Figure
186
59.