HPE FlexNetwork 7500 Series Security Configuration Manual page 80

IP address of the outbound interface (the default).

Figure 16 Adding the switch as an access device
# Add an account for device management.
Click the User tab, and select Access User View > Device Mgmt User from the navigation
tree. Then, click Add to configure a device management account as follows:
a. Enter account name hello@bbb and specify the password.
b. Select SSH from the Service Type list.
c. Specify 10.1.1.0 to 10.1.1.255 as the IP address range of hosts to be managed.
d. Click OK.
NOTE:
The IP address range must contain the IP address of the switch.
66