Specifying A Mac Binding Server On An Interface; Enabling Logging For User Logins And Logouts; Displaying And Maintaining Portal - HPE FlexNetwork 7500 Series Security Configuration Manual

Step
8. (Optional.) Specify the
version of the portal protocol.
9. (Optional.) Specify the
timeout the device waits for
portal authentication to
complete after receiving the
MAC binding query
response.
10. (Optional.) Set the aging time
for MAC-trigger entries.

Specifying a MAC binding server on an interface

After a MAC binding server is specified on an interface, the device can implement MAC-based quick
portal authentication for portal users on the interface.
To specify a MAC binding server on an interface:
Step
1. Enter system view.
2. Enter interface view.
3. Specify a MAC binding
server on the interface.

Enabling logging for user logins and logouts

This feature logs information about user login and logout events, including the username, IP address,
user's MAC address, interface name, VLAN, and reason for login failure. For portal log messages to
be sent correctly, you must also configure the information center on the device. For more information
about information center configuration, see Network Management and Monitoring Configuration
Guide.
To enable logging for user logins and logouts:
Step
1. Enter system view.
2. Enable logging for user
logins and logouts.

Displaying and maintaining portal

Execute display commands in any view and the reset command in user view.
Task
Display information about MAC binding servers.
Command
version version-number
authentication-timeout minutes
aging-time seconds
Command
system-view
interface interface-type
interface-number
portal apply mac-trigger-server
server-name
Command
system-view
portal log enable
Command
display portal mac-trigger-server { all | name
server-name }
182
Remarks
By default, the version of the
portal protocol is 1.
By default, the portal
authentication timeout time is 3
minutes.
By default, the aging time for
MAC-trigger entries is 300
seconds.
Remarks
N/A
The interface must be a Layer 3
interface.
By default, no MAC binding server
is specified on an interface.
Remarks
N/A
By default, logging for user logins
and logouts is disabled.