HPE FlexNetwork 7500 Series Security Configuration Manual page 198

Figure 54 Network diagram
Host
2.2.2.2/24
Gateway: 2.2.2.1/24
Configuration prerequisites
•
Configure IP addresses for the host, switch, and servers as shown in
they can reach each other.
•
Configure the RADIUS server correctly to provide authentication and accounting functions.
Configuring the portal authentication server on IMC PLAT 5.0
In this example, the portal server runs on IMC PLAT 5.0(E0101) and IMC UAM 5.0(E0101).
1. Configure the portal authentication server:
a. Log in to IMC and click the Service tab.
b. Select User Access Manager > Portal Service Management > Server from the
navigation tree to open the portal server configuration page, as shown in
c. Configure the portal server parameters as needed.
This example uses the default settings.
d. Click OK.
Figure 55 Portal server configuration
2. Configure the IP address group:
Vlan-int100
Vlan-int2
2.2.2.1/24
192.168.0.100/24
Switch
Portal server
192.168.0.111/24
RADIUS server
192.168.0.112/24
184
Figure 54 and make sure
Figure 55.