HPE FlexNetwork 7500 Series Security Configuration Manual page 87

Figure 24 Adding the switch as an access device
# Add a service.
Click the Service tab, and select User Access Manager > Service Configuration from the
navigation tree. Then, click Add to configure a service as follows:
a. Add a service named Dot1x auth, and set the service suffix to bbb, the authentication
domain for the 802.1X user. With the service suffix configured, you must configure the
access device to send usernames that include domain names to the RADIUS server.
b. Select Deploy VLAN and set the ID of the VLAN to be assigned to 4.
c. Configure other parameters as needed.
d. Click OK.
Figure 25 Adding a service
73