HPE FlexNetwork 7500 Series Security Configuration Manual page 351

# Import the client's public key from the public key file key.pub and name it switchkey.
[Switch] public-key peer switchkey import sshkey key.pub
# Create an SSH user named client002. Specify the authentication method as publickey for
the user, and assign the public key switchkey to the user.
[Switch] ssh user client002 service-type stelnet authentication-type publickey assign
publickey switchkey
# Create a local device management user named client002.
[Switch] local-user client002 class manage
# Authorize local user client002 to use the SSH service.
[Switch-luser-manage-client002] service-type ssh
# Assign the network-admin user role to local user client002.
[Switch-luser-manage-client002] authorization-attribute user-role network-admin
[Switch-luser-manage-client002] quit
3. Specify the private key file and establish a connection to the Stelnet server:
a. Launch PuTTY.exe on the Stelnet client to enter the interface shown in
b. In the Host Name (or IP address) field, enter the IP address of the Stelnet server
192.168.1.40.
Figure 95 Specifying the host name (or IP address)
a. Select Connection > SSH from the navigation tree.
The window shown in
b. Specify the Preferred SSH protocol version as 2.
Figure 96 appears.
337
Figure 95.