HPE FlexNetwork 7500 Series Security Configuration Manual page 256

NAS-ID profile
# After users pass authentication, display MAC authentication information. Verify that
GigabitEthernet 1/0/1 allows multiple MAC authentication users to be authenticated.
[Device] display mac-authentication interface gigabitethernet 1/0/1
Global MAC authentication parameters:
MAC authentication
User name format
Username
Password
Offline detect period
Quiet period
Server timeout
Reauth period
Authentication domain
Online MAC-auth users
Silent MAC users:
MAC address
GigabitEthernet1/0/1 is link-up
MAC authentication
Carry User-IP
Authentication domain
Auth-delay timer
Periodic reauth
Re-auth server-unreachable : Logoff
Guest VLAN
Guest VLAN auth-period
Critical VLAN
Critical voice VLAN
Host mode
Offline detection
Authentication order
Max online users
Authentication attempts
Current online users
MAC address
1234-0300-0011
1234-0300-0012
1234-0300-0013
# Display 802.1X authentication information. Verify that GigabitEthernet 1/0/1 allows only one
802.1X user to be authenticated.
[Device] display dot1x interface gigabitethernet 1/0/1
Global 802.1X parameters:
802.1X authentication
CHAP authentication
Max-tx period
: Not configured
: Enabled
: MAC address in uppercase(XX-XX-XX-XX-XX-XX)
: mac
: Not configured
: 300 s
: 180 s
: 100 s
: 3600 s
: sun
: 3
VLAN ID From port
: Enabled
: Disabled
: Not configured
: Disabled
: Disabled
: Not configured
: 30 s
: Not configured
: Disabled
: Single VLAN
: Enabled
: Default
: 4294967295
: successful 3, failed 7
: 3
Auth state
Authenticated
Authenticated
Authenticated
: Enabled
: Enabled
: 30 s
242
Port index