Setting The Time - Parmco PPOV-6S-PYRO-2 Installation And Operating Instructions Manual

● Long press" " and "

Setting the time

This is a 24 hour clock, make sure to set the right time before first use.
The clock can be set when the ON/OFF button
1. Turn on the oven and the display will show "00:00".
2. Touch clock button "
3. Touch " " or
4. Touch button " " or button "
Timer
To set the timer you should:
1. Touch button" "until the timer "
2. Touch " "or " " to set time.
3. touch button" " to confirm.
4. The " " stop flashing, the time will begin to count down.
5. Alarm sounds when the set time has been reached, and the alarm icon"
6. Touch button " ","
automatically after 90 seconds.
7. If you want to cancel the timer, you can set the time to " 0:00 ".
Caution
● Always keep the control panel clean, or the grease may damage the touch panel.
● Touch panel need to be regular cleaned by soft cloth.
● If alarm countdown time, cooking time, and clock functions are set up, the display will show the alarm count
down.
● The alarm time range is 1 second to 23 hours 55 minutes. Alarm is just to reminder, it does not turn the oven off.
Semi-automatic operation
This mode is to set the oven cooking time, when time is reached, the oven will turn off and a alarm
sound will be heard.
Set the cooking time when ON/OFF button "
1. Touch button" " twice, cooking time "
" can speed up temperature setting.
" " in OFF position.
", time display "12:00 ",and " "keep flashing.
" " to set time.
" to confirm time, or will auto confirm after 30 seconds.
" flashes on the display, and time display "0: 00".
"," "or " ",the alarm signal will go off. or it will be turned off
" is on, and the oven is working:
" flashes, display shows " 0:00 ".
" will flash.
11