Before First Time Use; Operating Instructions - Parmco PPOV-9S-48 Installation And Operating Instructions Manual

This oven will not operate until the clock time has been set.

Setting and changing the current time
When the appliance is connected to the electrical supply or when there has been a power cut, the
symbol for time flashes automatically.
1. To set or change a time that has already been set, press the Clock function
until the symbol for Time
2. Using the
3. After approx 5 seconds, the flashing stops and the clock displays the time of day set. The
appliance is now ready for use.

How to operate the oven
The appliance can be operated in demonstration mode for practicing all operating steps. The oven will
not heat up while in demonstration mode.
Switching on the Demonstration mode.
1. Switch off the appliance using the On/Off
2. Press and hold
lights up in the display.
Switching off the Demonstration mode.
1. Switch off the appliance using the On/Off
2. Press and hold
goes up in the display.

The Electronic Oven Control Panel

BEFORE FIRST TIME USE

flashes.
or button, set the current time.
and buttons at the same time until an acoustic signal is heard and "d"
and buttons at the same time until an acoustic signal is heard and "d"

OPERATING INSTRUCTIONS

button.
button.
button twice
9