Table of Contents
Advertisement
How to use your oven
The multifunction oven combines the advantages of a traditional convection oven with fan assisted
models in a single appliance.
It is extremely versatile and allows you to choose easily between different cooking modes.
Note: The first time you use your oven please set the thermostat to the highest setting and run the oven
for approximately half an hour. Ensure there is nothing inside and that the oven door is closed.
Opening the oven door allows the heat to dissipate. The odour that is often detected during this initial use
is due to the evaporation of substances used to protect the oven during storage until it is installed.
Note: Place the dripping pan provided on the bottom rack of the oven to prevent any sauce or grease
from dripping onto the bottom of the oven. Only use this when grilling food or when using the rotisserie
(only available on certain models). Do not use the bottom shelf and never place anything on the bottom of
the oven during operation as this could damage the enamel finishing. Always place your cookware
(dishes, aluminium foil, etc) on the grid provided with the appliance inserted especially along the oven
guides.
Before using for the first time
Setting and changing the current time
The oven only operates when the time has been set.
When the appliance is connected to the electrical supply or when there has been a power cut, the symbol
for time flashes automatically.
1. To change the time press the Clock function button repeatedly until the symbol for Time flashes.
2. Using the plus or minus button, set the current time.
After about 5 seconds, the flashing will stop and the clock displays the set time.
The appliance is now ready to use.
Getting to know the appliance
The oven can be operated in test mode for testing or performing all operating steps. The oven will not heat
up during the test.
Switching on the test mode
1. Switch off the appliance using the On/Off
2. Press and hold
display.
Switching off the test mode
1. Switch off the appliance using the On/Off
2. Press and hold
and
display.
and
buttons at the same time until a beep is heard and "d" lights up in the
buttons at the same time until a beep is heard and "d" disappears from the
button.
button.
3
Advertisement
Table of Contents
