Parmco PPOV-6S-PYRO-2 Installation And Operating Instructions Manual page 20

IMPORTANT
Never use screwdrivers or other utensils to remove the light cover.
This could damage the enamel of the oven or the lamp holder. Remove only by hand
Never replace the bulb with bare hands as contamination from your fingers can cause premature failure. Always
use a clean cloth or gloves.
Please note:
The bulb replacement is not covered by your warranty/guarantee
Door removal
In order to obtain easier access to the oven chamber for cleaning, it is possible to remove the door.
To do this, tilt the safety catch part of the hinge upwards. Close the door slightly, lift and pull it
out towards you. In order to fit the door back on to the oven, repeat the process in reverse. When
fitting, ensure that the notch of the hinge is correctly placed on the protrusion of the hinge holder.
After the door is fitted to the oven, the safety catch should be carefully lowered down again. If the
safety catch is not set it may cause damage to the oven.
17