Before First Time Use - Parmco PPOV-6S-MULTI-1 Installation And Operating Instructions Manual

This oven will not operate until the clock time has been set!
Setting the clock
When power is first supplied to the oven, the display on the control panel will light briefly
And "0:00" will begin blinking in the display.
1 "0: " will blink in the display when power is first supplied to the appliance and shows the set
hour.
2 Touch the Time / Temp / Function Adjust Button "+" or "-" to set the hour of the day.
Wait for about 5 seconds. The clock stops blinking and show the set hour.
3 Press the Time Button
4 Touch the Time / Temp / Function Adjust Button "+" or "-" to set the minute of the time.
5 Press the Time Button
now shows the time of day. The appliance is now ready to use.
 Setting The Multizone Mode
To activate the ability to select upper, twin and lower zones insert the divider when the oven is "Off"
1 Switch on the oven by touch "On/Off" Button.
2 Short touch the Function Button
3 Touch the Time / Temp/ Function Adjust Button"+"or"-" to select the desired oven function.
 Setting the oven temperature in single, upper and lower modes
1. Touch the Temperature Button
2. Touch the Time / Temp/Function Adjust Button "+" or "-" to adjust the temperature in
increments of 5 °C.
Single Mode
(Top Bake & Fan Grill)
Upper Mode
Lower Mode
The temperature may be adjusted during cooking.
OPERATING INSTRUCTIONS

BEFORE FIRST TIME USE

the " :00" will blink.
to finish setting the clock or wait for about 5 seconds. The display
to select the desired partition. (Upper. Lower twin)
and hold for about 3 seconds,the temperature will flash .
40°C - 250°C
40°C - 250°C
40°C - 250°C
- 12 -