Operation - Parmco PPOV-6S-PYRO-2 Installation And Operating Instructions Manual

Colour code
L=exterior live wires, usually coloured black, brown.
N=neutral
The colour is usually blue.
Beware of the correct N-connection!
E=earthing wire, the colour is green/yellow.

OPERATION

Prior first use
●
Remove packaging, clean the interior of the oven.
●
Take out and wash the oven fittings with warm water and a little non-abrasive washing liquid.
●
Switch on the ventilation in the room or open a window.
●
Heat the oven (to a temperature of 250℃, for approx. 30 minutes. Remove any stains and wash
carefully.
Caution!
When heating the oven for the first time, it is normal phenomenon to give off smoke and
peculiar smell. This will disappear about 30 min later.
Electronic programmer
7