Oven - Parmco PPOV-6S-PYRO-2 Installation And Operating Instructions Manual

Button
ON/OFF button
Oven function
selection
Oven lamp
Clock Function
OK button
Selector Buttons
Speedcook
Child lock button
Remark:
Use the function and temperature selector at the same time can turn on/off the oven.
Above is the control panel diagram, actual function please refer to product.
Select or set a function, must press
Heating Indicator
When the " " is on, that the oven is heating.
Also will show the heating status "
Residual Heat Indicator
After oven stop working, temperature display"
stand for 20% of setting temperature.
Speedcook
Speedcook function is mainly used for preheating the oven. When the preheating function is not yet complete, you
can by pressing the speedcook button"
do the following:
1. Setting the function and temperature (See steps on page 12 "Feature Selection
/temperature regulation").
2. Touch the rapid cooking button "
Explanation
For on / off the oven.
For upward downward selection of functional.
For on / off oven lamp. Select a function, the light will turn on.
Used to set the clock, alarm, cooking time and end of cooking
time.
Used to confirm selection during the heating process.
Used to set different temperatures, set the clock, alarm,
cooking time, end of cooking time.
Enable rapid pre-heating of oven. After setting the function
and temperature, touch this button and the oven will heat to the
selected temperature faster.
This enables you to lock the control panel. You must unlock
before you can use the oven panel.
button"
", total 5 sections, each present 20% of the setting temperature.
" show the residual heat information. 5 sections each
"any time to execute.
" the temperature display will show "
8
".
".