Before Using For The First Time - Parmco PPOV-6S-PYRO Installation And Operating Instructions Manual

This multi‐function oven combines the advantages of traditional convection ovens with those of
the more modern fan assisted models in a single appliance. It is an extremely versatile
appliance that allows you to choose easily between different cooking modes.
Note: The first time you use your appliance, we recommend setting the thermostat to the
highest setting for about half an hour with nothing in it, with the oven door shut. Then open the
oven door and let the room air in. The odour that is often detected during this initial use is due
to the evaporation of substances used to protect the oven during storage and until it is
installed.
Note: Only place the dripping pan provided on the bottom shelf of the oven to prevent any
sauce and/or grease from dripping onto the bottom of the oven when grilling food. For all other
types of cooking, never use the bottom shelf and never place anything on the bottom of the
oven when it is in operation because this could damage the enamel. Always place your
cookware (dishes, aluminium foil, etc.) on the grids/trays provided with the appliance,
positioned along the oven guides.
BEFORE USING FOR THE FIRST TIME
Setting and changing the current time
The oven only operates when the time has been set. When the appliance is connected to the
electrical supply or when there has been a power cut, the symbol for Time flashes
automatically.
1. To change time, press the Clock function button repeatedly until the symbol for Time
flashes.
2. Using the or
stops flashing and displays the set time. The appliance is now ready for use.
Getting to know the appliance
The appliance can be operated in test mode for testing or performing all operating steps. The
oven will not heat up during the test.
Test mode
1. Switch off the appliance using the On/Off
2. Press and hold the and buttons at the same time until a beep is heard and "d"
lights up in the display.
3. To turn off the test mode, press and hold the
is heard and "d" disappears from the display.
button, set the current time. After about 5 seconds, the clock
button.
and buttons together until a beep
7