Operation In Case Of Emergency - Parmco PPOV-6S-PYRO-2 Installation And Operating Instructions Manual

Removal of the internal glass panel
Unscrew and unfasten the plastic latch that is in the corner at the top of the door. Next take out the
glass from the second blocking mechanism and remove. After cleaning, insert and block the glass
panel, and screw in the blocking mechanism.

OPERATION IN CASE OF EMERGENCY

In the event of an emergency, you should:

Switch off all working units of the oven

Call the customer support centre

Some minor faults can be fixed by referring to the instructions given in the table below.
Before calling the customer support centre or the service centre check the following
points that are presented in the table.
PROBLEM
1.The appliance does not work
2.The programmer display
flashing "0.00"
3. The oven lighting does not work.
REASON
Break in power supply
Incorrect function selected
is The appliance was disconnected
from the mains or there was a
power outage.
The bulb is loose or damaged.
18
ACTON
Check the power has been turned
on.
Check the household fuse box, if
there is a blown fuse replace it with
a new one
Check if function and temperature
are set as required.
Set the current time (see use of the
programmer)
Tighten up or replace the blown
bulb(see cleaning and maintenance)