Changing The Oven Function; Changing The Oven Temperature; Thermometer Symbol - Parmco PPOV-9S-48 Installation And Operating Instructions Manual

Changing the oven function

1. To change the oven function, press the
function is displayed.

When a function mode is changed the suggested temperature of 180°C must be adjusted if required.

Changing the oven temperature

1. Press the
increments/decrements of 5  C.
7. An alarm will be heard and the temperature on the display screen will begin to flash. While it is
flashing you can change the temperature using the + or – buttons.
8. Once the desired temperature is selected, the display will flash 5 times and then solidify, indicating
temperature has been set.
9. Press the to check the actual temperature of the oven. The oven temperature will be
displayed for approximately 4 seconds. Do NOT hold down the button as it will lock the oven

Thermometer symbol


The slowly rising bars on the thermometer symbol
up. Bars become solid as the oven reaches certain temperatures during the pre heating process.
Once the oven has reached the selected temperature an alarm is will be heard once and the last
bar will flash for approximately 1 minute and then become solid.

Three rapidly rising bars on the thermometer symbol
selected. Once selected temperature is reached an alarm is heard twice and all 3 rising bars
become solid.
Speed pre-heat
After an oven function is selected, with the use of the additional Speed pre heat function, the empty
oven can be pre-heated in a faster short time. For example 190 will take 10 mins.
1. Set the desired cooking function. If necessary, change the suggested temperature.
2. Press the Turbo preheat

The bars are flashing rapidly after another show that Turbo pre heat cook function is operating.

When the temperature set is reached, the bars of the heat indicator all light up and the alarm
sounds.

The oven will now continue heating according to the pre-set oven function and temperature. You
can now place food in the oven.
Important: Do not put the food to be cooked into the oven, until Speed pre-heat is completed and the
oven is operating using the desired function.
or button, to raise or lower the temperature. The setting changes in
button. The symbol
or button repeatedly until the desired oven
indicates how hot the oven is as it heats
show that Turbo pre heat has been
lights up.
8