2.3.
User Requirements
Before you start, please ask your local ISP or network administrator for an Internet account from
User
Static IP User
DHCP User
PPPoE User
Dial-up User
3.
INSTALLATION & INSTRUCTIONS
3.1.
Connecting Cables
STEP 1
Connect the Ethernet line that came from the Internet leased line, cable modem, or ADSL
modem to the Ethernet port of the SiPTel IP Phone.
STEP 2
(Option) Connect the PSTN line to the PSTN port of the SiPTel IP Phone.
STEP 3
Connect the power port to the power source with a power adaptor.
3.2.
Booting Up process
STEP 1
If the cable connection is completed properly, the SiPTel IP Phone will start booting
automatically.
*************************
SYSTEM ON START
INITIALIZING
*************************
ISP Requirement
IP address
Gateway
Subnet mask
DNS
User ID
Password
ISP Telephone number
User name
Password
Wait for a while till the rebooting is completed.
SiPTel C01 IP Phone User Manual
Common
§ H.323 ID
§ E.164 Number