Abbreviations And Symbols; Applicable Standards - Reer MOSAIC Master M1 Installation And Use Manual

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC

Abbreviations and symbols

MCM = MOSAIC Configuration Memory: memory chip for MOSAIC M1 (accessory)
MSC = MOSAIC Safety Communication: proprietary bus for expansion units
MSD = MOSAIC Safety Designer: MOSAIC configuration SW running in Windows
OSSD = Output Signal Switching Device: solid state safety output
MTTF = Mean Time to Dangerous Failure
d
PL = Performance Level
PFH = Probability of a dangerous failure per Hour
d
SIL = Safety Integrity Level
SILCL = Safety Integrity Level Claim Limit
SW = Software

Applicable standards

MOSAIC complies with the following European Directives:
2006/42/EC
•
2004/108/EC
•
2006/95/EC
•
and is built to the following standards:
CEI EN 61131-2
ISO 13489-1
EN 61496-1
IEC 61508-1
IEC 61508-2
IEC 61508-3
IEC 61784-3
IEC 62061
8540780 • 25th June 2012 • Rev.15
"Machinery Directive"
"Electromagnetic Compatibility Directive"
"Low Voltage Directive"
Programmable controllers, part 2:
Equipment requirements and tests
Safety of machinery:
Safety related parts of control systems. General principles for design
Safety of machinery: Electro-sensitive protective equipment. Part 1: General
requirements and tests.
Functional safety of electrical/electronic/programmable electronic safety-
related systems: General requirements.
Functional safety of electrical/electronic/programmable electronic safety-
related systems: Requirements for electrical/electronic/programmable
electronic safety-related systems.
Functional safety of electrical/electronic/programmable electronic safety-
related systems: Software requirements.
Digital data communication for measurement and control: Functional safety
fieldbuses.
Safety of machinery. Functional safety of safety-related electrical, electronic
and programmable electronic control systems
Table 1
7