Signals; Inputs; Master Enable; Node Sel - Reer MOSAIC Master M1 Installation And Use Manual

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC

SIGNALS

INPUTS

MASTER ENABLE

The MOSAIC M1 master has two inputs: MASTER_ENABLE1 and MASTER_ENABLE2.
These signals must both be permanently set to logic level 1 (24VDC) for the MOSAIC
to operate. If the user needs to disable the MOSAIC simply lower these inputs to
logic level 0 (0VDC).

NODE SEL

The NODE_SEL0 and NODE_SEL1 inputs (on the SLAVE units) are used to attribute a
physical address to the slave units with the connections shown in Table 10:
NODE 0
NODE 1
NODE 2
NODE 3
It is not allowed to use the same physical address on two units of the same type.
8540780 • 25th June 2012 • Rev.15
NODE_SEL1 (Terminal 3)
0 (or not connected)
0 (or not connected)
24VDC
24VDC
Table 10
NODE_SEL0 (Terminal 2)
0 (or not connected)
24VDC
0 (or not connected)
24VDC
21