Reer MOSAIC Master M1 Installation And Use Manual page 14

The LOAD and RESTORE functions can be disabled via SW. (see Figure 29)
In order to be used, the expansion units must be addressed at the time of
installation (see the NODE SEL section).
Each time MCM is used, carefully check that the chosen configuration is the one that
was planned for that particular system. Try again a fully functional test of the system
composed of Mosaic plus all devices connected to it (see the TESTING the system
section).
14
MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
8540780 • 25th June 2012 • Rev.15