Swiping A Card - Ingenico iCT220 User Manual

Terminal User Guide

Swiping a Card

With the magnetic stripe facing down and towards the screen
as illustrated run the edge of the card along the bottom of the
card swipe slot on the right of your terminal. You should swipe
the card in one continuous movement and at an even speed.
If you see the prompt BAD SWIPE, check the orientation of the
card and try again. If the card cannot be read on the third
attempt, your terminal will prompt you for manual key entry of
the card number.
If a Chip Card is swiped, your terminal will request that you
insert the same card into the Chip card reader.
CHIP CARD
USE CHIP READER
Your Terminal
21