Supervisor Sub-Menus - Ingenico iCT220 User Manual

Supervisor Functions

Supervisor Sub-menus

There are two Supervisor sub-menus. They are the Password
menu and the Config menu. They allow access to extended
options within the Supervisor menus.
To access the Password menu press the menu key twice, then
choose SUPERVISOR by pressing the F3 key. You will be asked
to type your current supervisor password, and confirm this by
pressing the enter key, and choose PASSWORD by pressing the
F2 key.

Below is a summary of the functions within the Password menu
and how to access them, and what they do.

Some Supervisor functions must only be used when

instructed to do so by the terminal Helpdesk.
Password Menu
DELETE ACQ
MAC RESET
TMS RESET
CHANGE PWD
74
MENU, MENU, F3, [password], ENTER, F2
Deletes all datasets for one or all acquirers
from the terminals memory. Do not use this
feature unless instructed to do so by the
terminal Helpdesk.
Allows
(MAC) key to be reset to the initial value for
one or all acquirers. Do not use this feature
unless instructed to do so by the terminal
Helpdesk.
Allows
communications to the TMS to be reset to the
initial value. Do not use this feature unless
instructed to do so by the terminal Helpdesk.
Allows
Refund password) to be changed. The new
password
password requests.
the Message
the secure
the Supervisor
must be
Terminal User Guide
Authentication
password used
password
used for all
Code
for
(and/or
future