Supervisor Menus - Ingenico iCT220 User Manual

Terminal User Guide

Supervisor Menus

The Supervisor menus allow access to various management
functions in your terminal. To be able to access the Supervisor
menu, you must use the Supervisor password.
To access the Supervisor menus press the menu key twice,
then choose SUPERVISOR by pressing the F3 key. You will be
asked to type your current supervisor password, and confirm
this by pressing the enter key.

Once you have access to the Supervisor menus, press the
menu key to cycle through the various menu screens.
Below is a summary of the Supervisor functions and how to
access them, and what they do.

Some Supervisor functions must only be used when

instructed to do so by the terminal Helpdesk.
First Supervisor Menu Screen
HANDSET ID
PASSWORD
CONFIG
LOGON
MENU, MENU, F3, [password], ENTER
Allows the HANDSET ID value displayed on
the idle screen and printed on each ticket to
be set. The default value is 01.
Allows the various passwords in the terminal
to be reset or changed. Enters the PASSWORD
menu - see next section.
Allows
configuration options. Enters the CONFIG
menu - see next section.
Allows the terminal to make a test call to
some or all of the acquirers loaded on the
terminal. Do not use this feature unless
instructed to do so by the terminal Helpdesk.
the access
Supervisor Functions
to various extended
71