Ingenico iCT220 User Manual page 74

Supervisor Functions
Second Supervisor Menu Screen (Press menu once)
RINGS
TIPS
OP MODE
CALL-TMS
Third Supervisor Menu Screen (Press menu twice)
INTL
SALETYPE
TERMPARAM
UPGRADE
72
Allows the number of rings before the
terminal answers an incoming call to be set.
Can be set between 0 and 10. Do not use this
feature unless instructed to do so by the
terminal Helpdesk.
Allows the Gratuity/Tip mode to be switched
on and off. Setting TIPS to ON, sets OP MODE
to LATE.
Allows the setting of when the terminal will
contact the acquirer for authorisation during
the transaction. Gratuity/Tip mode is only
available in LATE mode. Setting OP MODE to
EARLY, sets TIPS to OFF.
Immediately sets off a configuration data call
to the Terminal Management System (TMS).
Do not use this feature unless instructed to
do so by the terminal Helpdesk.
Allows the international dialling code to be
set. Do not use this feature unless instructed
to do so by the terminal Helpdesk.
Allows the default transaction type to be set,
so the transaction type will begin as soon as
a card is swiped or inserted from the idle
screen. If REFUND is set then the Supervisor
password check will not be done.
Allows the
options. Do not use this feature unless
instructed to do so by the terminal Helpdesk.
Immediately sets off a software upgrade call
to the Terminal Management System (TMS).
Do not use this feature unless instructed to
do so by the terminal Helpdesk.
setting of internal
Terminal User Guide
terminal