Supervisor Functions; Supervisor Password - Ingenico iCT220 User Manual

Terminal User Guide

6. Supervisor Functions

Supervisor Password

The Supervisor password is designed to limit access to the
Supervisor functions (such as the Supervisor Menus, or Refund
transactions) on the terminal to those who have access to the
password.
Your terminal is shipped with an initial default password of
01483, but is configured so that a change of this password is
required before you process any transactions. If you forget
your password, please contact the terminal Helpdesk who will
be able to reset the password back to the default.

The following passwords are not valid choices for your

Supervisor password: 01483, 1234, 0000, or 9999.
Any other numerical password of four or more digits
will be a valid Supervisor password.

The Supervisor password allows entry into the Refund

option on the terminal.
To change your Supervisor password press the menu key
twice, then choose SUPERVISOR by pressing the F3 key. You
will be asked to type your current supervisor password (ie.
01483), then press enter, choose PASSWORD by pressing the
F2 key, followed by the F4 key to choose CHANGE PWD.
MENU, MENU, F3, [password], ENTER, F2, F4

You will need to enter your new numerical password (4 digits
or more) twice, pressing the enter key after each input,
before the Supervisor password is updated to this new value.

If your terminal is lost or stolen you should contact the

terminal Helpdesk immediately.
You are strongly advised to ensure that privileged access to
your terminal (including access to the Supervisor password) is
only granted to staff that have been independently verified as
being trustworthy.
Supervisor Functions
69