NEC NovaScale R630 User Manual page 165

Procedure in NEC ESMPRO Manager
1.
Select the target component in the [ft] tree.
2.
Check the current state with the "State" display on the target component screen. If the component is operating,
stop the component.
3.
Click the [Diagnostics] button in the [Maintenance] screen for the target component.
The diagnosis result can be confirmed by "Result" of the diagnosis on the target component screen. The result
of the diagnosis is reported by the Fault Tolerant Server series as an alert.
The result of diagnosis executed last is displayed in the [Diagnosis Information] column. In addition, if a fault
is detected by the result of the diagnosis, the state of the [General] tree of the component is changed.
Sample screen of NEC ESMPRO Manager
[Maintenance] screen of PCI module
[PCI Module] – [Maintenance]
5-47