Handling Optical Disks - NEC NovaScale R630 User Manual

Handling optical disks

Observe the following when you use an optical disk on Fault Tolerant Server series:
As for a disk such as a noncompliant "copy-protected CD," we shall not guarantee that you can use a CD
player to play it with this server.
Be careful not to drop the optical disk.
Do not bend or place anything on the optical disk.
Do not attach labels on the optical disk.
Do not touch the signal side (blank side).
Place the optical disk gently on the tray with the printed side up.
Do not scratch, or use a pencil or ballpoint pen to write on the optical disk.
Keep away from cigarette smoke.
Do not leave the optical disk in a place that is subject to direct sunlight or high temperatures (e.g., due to a
heater).
If the optical disk gets dirty with dust or fingerprints, wipe it gently from its center to edge with a dry soft
cloth.
When you clean the optical disk, use the cleaner expressly meant for it. Do not use a record cleaner (spray),
benzine, or thinner.
Store the optical disk in a protective case when not in use.
2-27