BMC Firmware Update
The firmware of the BMC on the PCI module can be updated.
The BMC firmware can be updated by using the ft server utility.
To update the BMC firmware, the firmware image file must previously be updated on the managed server. On the BMC
firmware update screen, specify the pass of the image file of the firmware to be updated.
IMPORTANT: Contact your maintenance engineer for the update of the BMC firmware.
BMC firmware update
Component
Remote
Local
BMC
–
When update to new firmware is required.
Remote: Executable from remote management PC by using NEC ESMPRO Manager
Local:
Executable on local server by using ft server utility
–: Not support
5-60