NEC NovaScale R630 User Manual page 61

Removing duplex configuration of RDR disks
This section describes how to remove duplex configuration from the disk with RDR setting.
In the example below, the duplication setting of the disks in the Slot 2 of the PCI modules 0 and 1 is removed.
IMPORTANT:
After executing the command, RDR settings will be cancelled but other data will remain.
You cannot release the duplex setting of the following disks:
･ Disk containing page files
･ Dynamic disk
To release the dual disk setting including the boot partition/volume, return the disk status to the Simplex first
and then release the setting.
The display of RDR Utility is not updated automatically. Therefore, update it every time you check the status of
disks by clicking [Refresh] from [Action] on the menu or pressing F5.
1.
Start the RDR Utility, right-click a disk you want to cancel RDR from the tree in the left pane, and select [Delete
RDR configuration on Physical Disk].
3-10