Standard Features - NEC NovaScale R630 User Manual

STANDARD FEATURES

The Fault Tolerant Server series is the server that has hardware for two servers.
High performance
®
TM
Intel Xeon Processor
High-speed Ethernet interface
(1000Mbps/100Mbps/10Mbps supported)
High-speed disk access (SAS (Serial
Attached SCSI))
Expandability
Three slots (low profile (133MHz) x 1, full
size/full height (100MHz) x 2) of PCI-X
bus
Large capacity memory (max: 12 GB)
USB interface
High-reliability
Memory monitoring feature (1-bit error
correction/ 2-bit error detection)
Bus parity error detection
Error notification
BIOS password feature
Management Utilities
NEC ESMPRO
Ready-to-use
Quick cableless connection: hard disk,
CPU/IO module
Fault-tolerant Feature
Redundant modules achieved within a
system
Higher hardware availability by isolation
of failed module
Various Features
Graphic accelerator " ES1000" supported
DVD Combo
Self-diagnosis
Power On Self-Test (POST)
Test and Diagnosis (T&D) Utility
Maintainability
Off-line Maintenance Utility
Easy and Fine Setup
EXPRESSBUILDER (system setup
utility)
SETUP (BIOS setup utility)
2-2