System Management - NEC NovaScale R630 User Manual

Server
Move the cursor onto [Server] to display the Server menu.
The following describes options you can configure in the Server menu and their functions.
Select an option with the "►" mark and press Enter to display its submenu.
Refer to the table below for information on options.
Main Advanced

System Management

Console Redirection
Event Log Configuration
Monitoring Configuration
Post Error Pause:
AC-LINK:
Power On Delay Time:
F1 Help ↑↓ Select Item
Esc Exit ←→ Select Menu
Option Parameter
Post Error Disabled
Pause
[Enabled]
AC LINK Stay Off
[Last State]
Power On
Power ON
[180]-255(s)
Delay Time
The table below lists how selections for "AC LINK" determine the power status of the server when the power supply to
the server restarts.
State before powered off
In service
Out of service (DC power: Off)
Forced shutdown *
* Pressing the POWER switch for over four seconds shuts down the power to the server.
System Management
Select "System Management" on the Server menu and press Enter to display the following screen.
ftServer Setup
Security Server
[Enabled]
[Last State]
[180]
-/+ Change Values
Enter Select
Description
Set whether or not to pause POST at the end
of POST if an error has occurred during
POST execution.
Specify the AC LINK feature by selecting the
status of the power supply unit of the server
when the AC power supply restarts. (See the
following table for details.)
Configure the DC ON delay time if AC LINK
is set to "Power On" or "Last State" (unit:
second).
Stay Off
Off
Off
Off
Boot Exit
Item Specific Help
Additional setup
menu to view
server management
features.
F9 Setup Defaults
Sub Menu F10 Save and Exit
[ ]: factory-set
Parameter
Last State
On
Off
Off
4-16
Power On
On
On
On