NEC NovaScale R630 User Manual page 170

Procedure in ft server utility
1.
Save the image data of the update firmware in a desired directory of the Fault Tolerant Server series.
Save the image data in some manner. Write down the path to the directory in which the image data is saved.
2.
Select the target component with the ft server utility.
3.
Check the current state of the target component with the LEDs. If the component is operating, stop the
component.
4.
Click the [Firmware...] button for the target component.
Sample screen of ft server utility
5.
Select [Specify new firmware for update], enter the directory in which the updated firmware specified in the
input box in step 1 is saved, and click the [Activate] button.
Perform the firmware update.
6.
Check the update result with the event log.
[CPU Module]
5-52