Making Backup Copies; Cleaning - NEC NovaScale R630 User Manual

Making Backup Copies

We recommend you make backup copies of your valuable data stored in hard disks of the server on a regular basis. For
backup storage devices suitable for the server and backup tools, consult with your sales agent.
When you have changed the hardware configuration or BIOS configuration, select "System Information Management"
and then "Save" of the Off-line Maintenance Utility to make a backup copy of the system information.

Cleaning

Clean the server on a regular basis to keep the server in a good shape.
Observe the following instructions to use the server safely. There are risks of
death or serious personal injury. See "PRECAUTIONS FOR SAFETY" in
Chapter 1.
• Do not disassemble, repair, or alter the server.
• Do not look into the DVD-ROM drive.
• Disconnect the power plug before cleaning the server.
Cleaning the Fault Tolerant Server series
For daily cleaning, wipe the external surfaces of the server with a dry soft cloth. Follow the procedure below if stains
remain on the surfaces:
IMPORTANT:
To avoid altering the material and color of the server, do not use volatile solvents such as thinner or benzene
to clean the server.
The power receptacle, the cables, the connectors on the rear panel of server, and the inside of the server must
be kept dry. Do not moisten them with water.
1.
Make sure that the server is powered off.
2.
Unplug the power cord of the server from a power outlet.
3.
Wipe off dust from the power cord plug with a dry cloth.
4.
Soak a soft cloth in neutral detergent that is diluted with cold or warm water, and squeeze it firmly.
5.
Rub off stains on the server with the cloth prepared in Step 4.
6.
Soak a soft cloth in water, squeeze it firmly and wipe the server with it once again.
7.
Wipe the server with a dry cloth.
8.
Wipe off dust from the fan exhaust opening on the rear of the server with a dry cloth.
WARNING
6-3