Keypad & Led+Ir Board; Keypad Swapping; Led+Ir Board; Sealed Engine - Barco RLM G5 Performer Service Manual

8.8 Keypad & LED+IR Board
8.8.1

Keypad swapping

How to swap the Keypad
The keypad is mounted onto the inside of the top cover. To remove the top cover, keypad board has to be disconnected (see top
cover removal)
1. Remove the 5 screws (A), securing the keypad board to top cover. (image 8-26)
2. Remove the keypad board.
Image 8-26
Keypad removal
8.8.2

LED+IR Board

How to swap the LED+IR board
The LED+IR board is mounted onto the inside of the top cover. To remove the top cover, LED+IR board has to be disconnected
(see top cover removal)
1. Remove the 4 screws (A), securing theLED+IR board to top cover. (image 8-27)
2. Remove the LED+IR board.
Image 8-27
LED+IR board removal

8.9 Sealed Engine

Overview
• Sealed Engine removal
• Sealed Engine mounting
R5976766 RLM G5 22/04/2004
8. Module/Unit Identification
A
A
37