Removal Of The Top Cover - Barco RLM G5 Performer Service Manual

7. Projector Cover Removal to access Modules
Image 7-2
Button panel cover removal
7.1.3

Removal of the top cover

How to remove the top cover
1. Remove the screw (A) securing both plates blocking the slots for the rear cover guides. (image 7-3)
2. Pull out the respective plugs, connecting Control panel (A) and LED panel (B) to projector electronic. (image 7-4)
3. Loosen the top cover by turning the cover lock screw (A) half a turn counterclockwise. (image 7-5)
4. Lift up the top of the cover a little and move the cover backwards to slide both rear cover guides (A) out of their slot (B). (image 7-6)
5. Remove the top cover.
Image 7-3
Blocking plates removal
Image 7-4
Disconnection LED and Control panel
18 R5976766 RLM G5 22/04/2004