8. Module/Unit Identification
Group
I
II
III
Fan 4 is not added to one of the above kits because the fan is mounted inside the sealed engine. In the field
there is no guarantee about the sealing after the sealed engine has been opened.
8.3 Power Box Complete
Overview
•
Power Box Access
•
Parts of the Power Box Assembly
•
Power Box Swapping
8.3.1
Power Box Access
Access to Power Boards
1. Disconnect the Fan, built-in in the power box cover, by pulling out the Fan wire plug (A) on the SMPS control board. (image 8-4)
2. Remove the 8 screws (B) securing the power box cover.
3. Lift up the cover and move backwards to remove. (image 8-5)
Image 8-4
SMPS box cover removal
26
Contents
Fan 1/2/3
Fan 8/9/10/11
Fan 5/6/7
Kit number
B401041K
B401042K
B401043K
A
B
R5976766 RLM G5 22/04/2004