Barco RLM G5 Performer Service Manual page 90

Image 12-5
Mounting the doughty clamps
How to hook the clamp onto the truss beam
1. Open the clamp by loosening the clamp lock. (image 12-6)
2. Hook the clamp onto the truss beam.
The built-in clamp trigger automatically shuts the clamp around the truss beam.
3. Secure the position of the clamp by tightening the clamp lock.
D
Image 12-6
Projector mounting onto a truss
When the projector is mounted onto the truss, the adjustable spacers (A) in the clamp assembly allow to adapt
small level differences in the clamp height, using a wrench of 17 mm.
R5976766 RLM G5 22/04/2004
12. Projector Suspension/Stacking
(6)
(5)
(4)
(3)
(1)
(2)
A
B
C
81