Configuration Of Analogue Value (Scaledvalueconfig); Range Configuration (Rangeconfig) - ABB COM600 series 5.0 Technical Reference Manual

1MRS758690
3.2.6.
3.2.7.
COM600 series 5.0
Master Protocols (Ethernet) and Applications Technical Refer-
ence Manual
ƒ×10 units.multiplier = (¡×scaleFactor)+offset
Table 3.2.5-1 Analogue value (AnalogueValue)
Name Type
i INT32
f FLOAT32
Example:
MV: mag.f (VT_R4) & mag.i (VT_I4) > mag (VT_R4)

Configuration of analogue value (ScaledValueConfig)

The following table defines the mapping of configuration of analogue value (ScaledValue-
Config).
Table 3.2.6-1 Configuration of analogue value (ScaledValueConfig)
Name Type
scaleFactor FLOAT32
offset FLOAT32

Range configuration (RangeConfig)

The following table defines the mapping of range configuration (RangeConfig).
Table 3.2.7-1 Range configuration (RangeConfig)
Name Type
hhLim AnalogueValue
hLim AnalogueValue
lLim AnalogueValue
llLim AnalogueValue
min AnalogueValue
Value/ Value M/O/C
range
integer value Not Used
floating point Not Used
value
Value/ Value M/O/C
range
floating point
value
floating point
value
Value/ Value M/O/C
range
floating point
value
floating point
value
floating point
value
floating point
value
floating point
value
OPC Data Type
Not Used
Not Used
OPC Data Type
M VT_R4
M VT_R4
OPC Data Type
M VT_R4
M VT_R4
M VT_R4
M VT_R4
M VT_R4
27