ABB COM600 series 5.0 Technical Reference Manual page 76

76
COM600 series 5.0
Master Protocols (Ethernet) and Applications Technical Refer-
ence Manual
device is called. When the service is finished or an error occurs, the OPC request is
released.
The status of the latest service is available in the Status attribute. After a service is started,
the status changes to the specific service status code. If the service is completed success-
fully, the status code is set to Ready (see Table 3.4.4-2). For more information about
service failure status codes, refer to Table 3.4.4-3 and Table 3.4.4-4. Only one service
can be called at a time.
GetFile
You can copy a specified file from a remote device to the local file storage with the
GetFile service. Through IEC 61850, this is done in three phases. First, the remote file
is opened, then read, and finally closed. Remote file parameters identify the remote file.
During this operation, the Status, Received bytes and File size in bytes attributes are
updated as the file is moved (in max MMS message size parts). The copied file is renamed
and placed to the local file storage according to local file parameters.
Required parameters:
Control code:
Service status codes:
Failure status codes:
The remote file name:
The local file name:
GetFileAttributeValues
The GetFileAttributeValues service obtains the name of a file or group of files in the
remote file storage. Received file attributes are printed to the Output attribute. This service
prints only file names.
Required parameters:
Control code:
Service status codes:
Failure status codes:
Remote file name
Remote file directory
Local file name
Local file directory
1
1100
1120
1140
91xx
Remote file directory + Remote file name
Local file directory + Local file name
Remote file name
Remote file directory
2
1200
92xx
1MRS758690