Iec 61850 Logical Device Attributes; Iec 61850 File Transfer; General Information About Iec 61850 File Transfer - ABB COM600 series 5.0 Technical Reference Manual

1MRS758690
3.3.6.
3.4.
3.4.1.
COM600 series 5.0
Master Protocols (Ethernet) and Applications Technical Refer-
ence Manual
Request:
SetDataValue&LDInst=LD1&LNName=LLN0&DORef=brcbStat-
Urg02&Attr=RptEna&FunConstr=BR&v=False
Reply OK:
<?xml version="1.0"?><!DOCTYPE XSAT SYSTEM "xsat-004.dtd"> <XSAT>
<Response> <Result>failure</Result> </Response> </XSAT>

IEC 61850 logical device attributes

Table 3.3.6-1 IEC 61850 logical device attributes
Name Value or Value range/ Default
Transparent SPA The contents of a valid SPA
request

IEC 61850 File transfer

General information about IEC 61850 File Transfer

This section defines how the IEC 61850 file transfer services between the IEC 61850
OPC Server and the IEC 61850 devices are used through OPC DA. Since it is not possible
Description
Data type: Text
Access: No limitations
Makes it possible to communicate with
SPA unit by sending SPA message and
reading the reply as text in SPA format
from this item. The communication is
passed through a TCP/SPA tunnel, where
this attribute acts as an independent
TCP/SPA client and is connected to a
TCP/SPA server. The TCP/SPA server is
then responsible for forwarding the SPA
messages to and from the SPA devices.
The SPA/TCP client handles its own
communication separately from other
communication. No checks are done on
command or reply contents they are simply
passed on. This parameter is available
only by configuration.
This attribute must be enabled by setting
the Transparent SPA Address. For
example:
SPA address = 1
SPA command RF must we written in
format RF: and sent in format 1RF:. The
reply is received in format >1D:REF543 :.
73