Iec 61850 Device Attributes - ABB COM600 series 5.0 Technical Reference Manual

3.3.4.
66
COM600 series 5.0
Master Protocols (Ethernet) and Applications Technical Refer-
ence Manual
Name Value or Value range/ Default
Received status
requests

IEC 61850 device attributes

Table 3.3.4-1 IEC 61850 device attributes
Name Value or Value range/ Default
In use 0 = Out of use
1 = In use
Default: 1
Description
Data type: Integer
Access: No limitations
Unsolicited status requests received from
devices
Description
Data type: Integer
Access: No limitations
The operational status of the device
whether it is in use or out of use. Taking
the device out of use with this attribute
stops all data communication with the
device and closes the connection. All
operations that would result in a data
exchange are disabled. Setting in use to
1 will take the device back in use and tries
to reestablish the connection to a physical
device. The device itself is not affected by
the attribute, only protocol stack's image
of the device. The in use attribute has no
affect on devices in simulation mode.
1MRS758690