File Transfer Service Codes - ABB COM600 series 5.0 Technical Reference Manual

3.4.4.
80
COM600 series 5.0
Master Protocols (Ethernet) and Applications Technical Refer-
ence Manual
Control code: 0

File Transfer service codes

Status codes can be read from the Status attribute. The status indicates the current service
status and the service result.
Table 3.4.4-1 Service control codes
0 Cancel
1 GetFile
2 GetFileAttributeValues
3 GetFileAttributeValuesEx
4 Rename File
5 SetFile
6 DeleteFile
In the service status codes, the first number indicates success (1) or failure (9). The
second number indicates currently requested service (0 - 6). If a local service is requested
in multiple parts for the remote device, the third number indicates the currently called
remote service (1 - 3). The fourth number gives a detailed failure code (0 - 3).
Example:
9601 = parameters error, remote file delete error
9123 = remote service error, remote file read error
Table 3.4.4-2 Success
1000 Ready
1100 Opening remote file
1120 Reading remote file
1140 Closing remote file
1200 Requesting remote directory file details
1300 Requesting remote directory file details
1400 Renaming remote file
1500 Requesting remote device to obtain local file
1520 Remote device requested to open local file
1540 Remote device requested to read local file
1560 Remote device requested to close local file
1600 Deleting remote file
1000 Service done
1MRS758690