Configure The Scanner Decode Security Settings - Intermec CN51 User Manual

Configure the Scanner Decode Security Settings

CN51 Mobile Computer User Manual
TLC 39 Settings and Descriptions (Continued)
Setting
ECI Security
User defined symbology ID
Code mark
You use the Settings app to set options for decode security. These
settings ensure that the computer decodes bar codes correctly and
securely.
1 Start the Settings app and tap Scanners > Internal Scanner >
Decode Security.
2 Tap a setting in the list to change it. Your changes are
automatically saved.
Chapter 3 — Use the Scanner
Description
Sets the security level used when reading
TLC 39 bar codes if EDI has been found
and Code 39 is enabled. The higher the
value, the more secure the decoding, but
higher values can interfere with decode
speed. Range is 0 to 64.
Default is 10.
Sets the symbology ID for TLC 39. Range
is 1 to 4 ASCII characters. \xFF is not
supported.
Default is H0.
A one-character code mark that serves as
an identifier for TLC 39.
Default is *.
73