Changing The Beep Volume - Intermec Trakker Antares 2410 Quick Start Manual

C d 39 nuggetfont
Status LED Descriptions
Icon Name Description
Good Read This LED turns on when you successfully scan a
bar code label.
User Defined This LED is user defined. You can program this
LED to turn on and off for any task or error within
your application.
Network The Network Connect LED may be on, off, or
Connect blinking.
Modifier This LED indicates that one of the modifier keys,
such as a, is active. If Caps Lock is enabled, this
LED remains on until you disable Caps Lock.
Battery This LED turns on when there is a low battery
charge and the terminal is on.

Changing the Beep Volume

The terminal has a beeper that provides you with audio feedback
as you use the terminal. You can change the beep volume to
meet the needs of your working environment.
When you change the beep volume, you will also change the
keyclick volume if the Keypad Clicker command is enabled. The
keyclick is the sound that you hear when you press a key on the
terminal.
There are two ways to change the beep volume:
• Use the Backlight key (press ) +) on the keypad. Each time
you press ) +, it makes the beep volume one level louder.
On the 241X, there are three beep volume levels including
off. If the volume is at the loudest level and you press ) +,
the beep volume is turned off. If you press ) + again, the
volume changes to the quietest level.
•
Use the Beep Volume command. For help, see "Beep
Volume" in Chapter 6 of the 2400 Family system manual.
Trakker Antares 241X Handheld Terminal Quick Start Guide 17